MANUAL for NIKON COOLSCAN IV 4000 ED SCANNER Power Cable Cord CD Nikon Scan. $89.00 +$49.85 shipping. Make Offer - MANUAL for NIKON COOLSCAN IV 4000 ED SCANNER Power Cable Cord CD Nikon Scan. Nikon Coolscan LS-4000 ED Film Scanner FOR PARTS 3. Nikon CoolScan 4000 ED VueScan is compatible with the Nikon CoolScan 4000 ED on Windows x86, Windows x64, Mac OS X and Linux. If VueScan isn't working with the Firewire cable, try a different Firewire port or a different Firewire cable. This scanner has an infrared lamp for scanning film.

If you can afford the 4000 DPI LS-4000 with easy to use USB: DO IT. The 1800 bucks of this and your film camer smokes a 1800.00 Nikon D300, and unlike the D300, will still have the 25-100 Megapixel resolution. This scanner is good for those of us waiting for 50 Megapixel cameras.

Coolscan

VueScan is compatible with the Nikon LS-4000 on Windows x86, Windows x64, Mac OS X and Linux.

If VueScan isn't working with the Firewire cable, try a different Firewire port or a different Firewire cable.

This scanner has an infrared lamp for scanning film. VueScan's 'Filter Infrared clean' option can be used to remove dust spots from film scans. This is similar to (and we think better than) the ICE and FARE algorithms.

It scans with both visible light and infrared light in a single pass.

Infrared cleaning works well with all types of color negative and color slide film, including Kodachrome. However, silver-based black/white film doesn't work with infrared cleaning because the silver particles look the same in visible light and infrared light.

Nikon coolscan v ed

All types of Nikon film adapters are supported, including the SF-200 slide feeder.

If you're using Windows and you've installed a Nikon driver, VueScan's built-in drivers won't conflict with this. If you haven't installed a Windows driver for this scanner, VueScan will automatically install a driver.

You can use this scanner on Mac OS X and Linux without installing any other software.

Nikon sold this scanner in some countries as the CoolScan 4000 ED.

Workflow for photos taken on film, from scanning to editing to exporting.

Introduction

In this article I will go over my workflow for photos taken on film rather than digital. I will be using software suite Nikon Scan 4, and will go over the settings I use for scanning with the Nikon Super Coolscan 4000 ED hereafter ‘LS4000’. This article will be most of interest to anyone using Nikon Scan 3 or 4 with any of the Nikon Coolscan film scanners. Some features and options will vary per scanner but most will be the same. It will also be interesting for people who use other scanners and software but will need to take this information as is and ‘translate’ it into their own software suites functions and options.

The Nikon Super Coolscan 4000 ED

The scanner features a Nikon lens with ED glass and a RGBI LED set for consistent backlighting of the Negative or slide film. It features Digital ICE for dust and scratch removal during scan, and colour restoration for faded and colour casted film. The LS4000 uses a FireWire 400 (IEEE1394) interface which works fine but might be a problem for people with computers without FireWire. Some of the other Nikon Coolscan scanners feature USB connectivity which might be more compatible with most current computer hardware.

Nikon Scan 4 Compatibility

Since the software has not been updated since 2007 it is not really compatible with todays operating systems. This is why people like to use third party software and drivers like VueScan or SilverFast to use the Nikon Coolscan scanners. I tried both software suites but still think the older Nikon Scan 4 software is easiest and gives me consistent and best results with the least amount of effort.

My main computer is a Mac Pro with OS X 10.10 which obviously does not support the Nikon Scan 4 software. So I had two options: I either installed Windows through bootcamp on my Mac Pro or I would have to dig up an old PowerBook G4 with OS X 10.5.8 on it. Both options work, but if you have an old Mac that works running 10.4 or 10.5 featuring a FireWire port I would just stick with that.

Nikon coolscan 4000 mac

Compatibility:
Windows: XP & Vista 32 bit (7 and 8 in 32 and 64 bit with a workaround)
OS X: 10.4 Tiger & 10.5 Leopard (later operating systems not supported)

Workflow at a glance

Since scanning and editing digitally is a little different from importing images from your SD card I will sketch the workflow from step by step. Read on so we can get more in depth into the whole process.

[PowerBook G4]
Scanning -> Saving locally -> Transferring

[Mac Pro]
Importing in Lightroom -> Archiving -> Editing -> Exporting

Setting up Nikon Scan 4 and creating a default profile

After opening the Nikon Scan 4 suite, turning on the scanner and putting in the first strip of film (6 frames at a time maximum) I click on the ‘Show Thumbnails’{1} button so I get 6 thumbnails of the negatives. This only takes a few seconds. Then I click on one of the thumbnails{2} and in the ‘Tool Palette 1’ (which you can enable by clicking ‘View -> Tool Palette 1’ on your menubar) we will edit some settings and then save it as a profile for further use.

First lets turn off some features we will not be using since we can do it in Lightroom afterwards which is better: ‘Curves’, ‘Color Balance’, ‘Unsharp Mask’ and ‘LCH Editor’.

Now go to ‘Digital ICE 4 Advanced’{4} and check ‘Enable Digital ICE’ and select [On (Normal)] You might think why not use [On (Fine)]. The ‘fine’ setting makes the images softer and you will lose fine details this is only interesting when you are scanning film with a lot of grain and or a lot of damage to the negatives. For now leave it on [On (Normal)]. Leave the ‘Post Processing’ and ‘Digital DEE’ off.

Now go to ‘Scanner Extras’ and make sure the ‘Scan Bit Depth’{4} is set as high as possible. This is [14] for the LS4000. At ‘Multi Sample Scanning’{5} set it to [Normal (1x)] for now increasing this one step will double the scanning time, if you set it to 16x it will take 16 times longer. This feature is there to eliminate noise created by the CCD sensor on very dark negatives, but I have never seen any difference between 1x or 16x scan.

Now we have set the scanner parameters and values so that it is easily usable and compatible with most colour negative film. let’s save this as a profile for further use by clicking on the ‘Settings’{6} dropdown menu (In the top left side of the Nikon Scan 4 suite) and selecting ‘Save Settings…’ and safe the profile as ‘Default for Colour Negatives’.

Now to make sure we are saving the files with the highest quality possible let’s setup the default filetype extension for the files when you save the scanned negatives. Go to ‘Nikon Scan 4 -> Preferences…’ and click the tab ‘File Saving’ and make sure it is set to the [NEF] filetype and click ‘OK’ in the lower right corner. This way the files are saved as ‘NEF’ Raw files which are fully compatible with Lightroom, Photoshop and the like. This way they are as flexible as possible for postprocessing in those type of programs.

Quit the Nikon Scan 4 suite.

Nikon Coolscan 4000 For Mac
Scanning the colour negatives

Now that we did our first time Nikon Scan 4 setup we can actually start scanning our Colour Negatives. There should still be a film strip with 6 negatives in the scanner; if not, put one in now and open Nikon Scan 4 again.

Click the ‘Show Thumbnails’{1} button again so we get to see the thumbnails again. Now select the thumbnails of the negatives you want to scan by holding CMD while clicking the ones you want to scan, or CMD+A to select all the negatives. After selecting the negatives they are marked by blue edges around the corners{2} and we can load the profile we created earlier on. You can load different profiles for different negatives so make sure you have all the negatives you want to scan selected. Load the profile we created earlier by clicking the ‘Settings’{6} dropdown menu and at the bottom click on the [Default for Colour Negatives] profile. Now that the scanning parameters are set we can start scanning, hit the ‘Scan’{7} button the ‘Batch Scan Options’ window will open and you can select some options. Select all but ‘Close window and eject film’ then click ‘Ok’.

Now we can define the naming of the scans, for example I am scanning a roll of Agfa Vista 200 so at the Prefix I enter ‘AGFA_200_01_15_’ the 01 being the month January and the 15 the year 2015 of when I shot the film. Now I select that the numbering is done with 2 digits and the starting index being 1 or 0 whichever you prefer. Now we click the ‘Browse’ button to define a location where we want the files to be saved. As you can see the ‘File Type’ is already set to [NEF File] because we set this as the default file type extension. Now click the ‘Ok’ button and the scanning will begin, it will automatically scan all 6 the negatives and save them. After it is done scanning you can eject the film by clicking the ‘Eject button’{8} or ‘Scanner -> Eject’ in the menubar.

Repeat the process until your whole filmroll is scanned: Enter film, load thumbnails, select the ones you want to scan, load the profile, click ‘Scan’, click ‘Ok’, click ‘Ok’ (note the numbering automatically counts up) and the scanning starts.

Transferring the scans
For

Since I am working on an old PowerBook G4 machine to drive the scanner I will now transfer the files from the PowerBook G4 to my Mac Pro over the network, but you can use a large thumb drive or USB/FireWire harddrive too of course.

Importing in Lightroom and Editing

When importing into Lightroom make sure to tag the photos properly with keywords{1}, the photos do not have a lot of EXIF data like digital camera files so you want to do this manually and as precise as possible. I usually put down: the camera used, the lens, the film used, the location and project. Make sure to click ‘Copy as DNG’{2} since the NEF files created by Nikon Scan 4 are quite old it is best in my opinion to convert them to a modern DNG file for highest compatibility. Click ‘Import’{3} and the scans will start importing into your Lightroom catalog.

When the scans are imported I usually flick through them and flag the ones I want to use with the ‘~’ key on my keyboard and leave the others be. In the bottom right corner I filter for [Flagged]{5} photos so I only see the photos I flagged in my library.

Then I select a photo and go to the [Develop]{4} tab to make some adjustments. I usually adjust the white balance slightly to make it feel as natural as possible, and make sure the highlights are correct. Pulling the highlights slightly if there are any blown highlights in the sky for example. Nice thing about Colour Negatives is that you can pull them really well, but not push them after development. Overexposure is not a problem, but underexposure is. It’s the exact opposite compared to files from digital cameras.

Photos taken on film and scanned with Nikon Scan 4 are just as flexible as digital camera Raw files so you can edit them any way you like, just like you’re used to from digital camera files. Just keep in mind the thing about the exposure: pulling is fine but pushing is usually not.

#1 Lightroom Import window #2 Lightroom Library window

Exporting in Lightroom

After making adjustments it’s time to either export to share the photo digitally or export for printing. Now I can go into print exporting on and on but we will stick with the basics for sharing online, and print.

Right click an image and select ‘Export -> Export…’ a new window will open where you can adjust the parameters for the file you want to export for printing or sharing online.
Digital sharing:

If you want to export the file with the highest possible quality in JPEG file format I usually go for the following settings:

‘Export Location’
Export To: [Choose folder later]
Existing Files: [Ask what to do]

This way Lightroom will ask where you want to export the photo when you actually click export, and not to a predefined location. This is my personal preference.

‘File Naming’
I leave ‘Rename to:’ un-ticked so the file keeps it’s filename but now with JPEG as filetype extension.

‘File Settings’
Image Format: [JPEG]
Color Space: [sRGB]
Quality: [100] (you can lower this to 89 with invisible loss in quality but a reduced file size)

‘Image Sizing’
I leave ‘Resize to Fit:’ un-ticked.

This way the image keeps it’s original dimension in pixels or if you have cropped the image in Lightroom keeps the cropped dimension in pixels. If you would like to share the file but make the dimensions smaller try the options here and see what is best for your purpose.

Nikon Coolscan 4000 Mac

‘Output Sharpening’
Sharpen for: [Screen]
Amount: [Standard]

‘Post-Processing’
After Export: [Show in Finder]

This way it opens a finder window with your exported images, convenient!
Printing:

If you want to export the file with the highest possible quality for printing it is good to know what size you will be printing at in physical dimensions, how much PPI/DPI the printer- or the print service you will be using can handle and what file type they can handle. Below I will be showing the settings I use to deliver files to ‘Foto Schelfhout’ in Antwerp, Belgium they use a Durst Lambda enlarger/printer.

‘Export Location’
Export To: [Choose folder later]
Existing Files: [Ask what to do]

This way Lightroom will ask where you want to export the photo when you actually click export, and not to a predefined location. This is my personal preference.

‘File Naming’
I leave ‘Rename to:’ un-ticked so the file keeps it’s filename but now with TIFF as filetype extension.

‘File Settings’
Image Format: [TIFF]
Color Space: [Other…] (Fotoschelfhout has their own profile they deliver.)
Compression: ZIP
Bit Depth: [16 bits/component]

‘Image Sizing’
Tick ‘Resize to Fit:’ [Dimensions]
xx * xx [IN] or [CM]
Resolution: 400 [pixels per inch]

Of course the ‘xx * xx’ should be the dimensions you are going to print at, and the ‘pixels per inch’ should match the highest resolution your printer- or print service can handle, unless you’re printing really big and for long range viewing. But that will be discussed in a different article.

‘Output Sharpening’
Sharpen for: [Matte paper] or [Glossy paper]
Amount: [Standard] or [Low] is what I usually use.

‘Post-Processing’
After Export: [Show in Finder]

Nikon Coolscan 4000 For Mac Pro

This way it opens a finder window with your exported images, easy!

Wrap up

Below you will find a few more shots taken with various cameras and film types but all scanned with the Nikon LS4000. I hope you have enjoyed reading and viewing the images in my article – as always feel free to subscribe to my newsletter to receive an email when I write a new article, and to leave your thoughts in the comments bellow.

Nikon Coolscan 4000 For Mac Download

Donations are really welcome too since a lot of time goes into writing these articles. Donations can be made through Paypal to [email protected] or contact me if you wish to donate in another way.

Thanks.

Nikon Super Coolscan 4000 Driver

Various Leica cameras, various lenses and various types of film.

Coments are closed

Most Popular Posts

  • My Book For Mac Ntfs
  • Download Latest Adobe Pdf Reader For Mac
  • Carbon Copy Cloner For Mac Os
  • Office For Mac 2011 Mac Os
  • Flash Player Flash For Mac

Scroll to top